Sunday, July 31, 2016

games not playing.

Since I rooted my phone I can't play some of my games. I've tried the root cloak app with no luck any suggestions?


from xda-developers http://ift.tt/2an4vnt
via IFTTT

need help

I have some games that won't play now that I rooted my phone. I have tried root cloak app with no luck any suggestions?


from xda-developers http://ift.tt/2aBoX0Z
via IFTTT

s6 briked

My s6 joked I have s6 920f and I spend a rom via Odin and gave hidden error and not league helme me.:crying::crying:,:crying::crying:


from xda-developers http://ift.tt/2an4OPa
via IFTTT

Galaxy S6 - NO NETWORK, No IMEI no baseband NO EFS Backup

On my Samsung Galaxy S6 which was Vodafone before, on 6.0.1 I flashed twrp everything was working perfect fine apart from this time I forgot to backup my efs so now i have an unknown baseband and also an unknown IMEI, on the notification bar there is a prohibited symbol, like a constant silent mode, I was wondering is there any way either somebody can send me there backup, or any way I can get my phone back in to working order?


from xda-developers http://ift.tt/2aBpvDO
via IFTTT

Asus Zenfone 2 (ZE551ML) Stuck at Asus logo screen. Cannot enter fastboot menu.

As mentioned in the title of the thread, my Zenfone 2 is stuck at the Asus logo screen. I tried installing an OTA update with the phone being rooted.
To solve this initial problem, i flashed Temp CWM with the help of my computer. I successfully got to the recovery menu and attempted to wipe all of the phone's data. I don't know if it did or not, because it got stuck on this process for 10 minutes, apparently not doing anything. So I did something that may have completely f****d the phone. I restarted it during the 'wipe'.
So here came the second problem: I cannot access the Fastboot screen anymore, therefore I cannot flash anything, and it still won't open. :crying:
Desperately, I even tried using the Asus Flash Tool to flash its original firmware, while at the logo screen. It won't move.
So, in case someone actually knows how to solve this, or there's someone with the same problem of mine alongside which I can mourn my dead phone, I'll leave this thread here. I also have an additional question: is the warranty valid in this situation?
Thank you.


from xda-developers http://ift.tt/2an4Czx
via IFTTT

p1000 brick

My Samsung Galaxy Tab P1000 is bricked,computer power cut off in between when uploading custom recovery via odin now its not going on download mode even tab is not getting on,already charge it for 4 hours,when chrging is on then only phone is blink,its shows pc to mobile but when i try to connect it to computer, the phone is not turn on, im also try to turn on it by press the power or power - vol down, but there is no responding. So how can i flashed it?please help me out


from xda-developers http://ift.tt/2artbq0
via IFTTT

Waterproof pouch.

Can anyone recommend a waterproof pouch to take nexus 6p to the beach and pool.? I don't care much about diving with it or even able to use the camera. Just want a pouch to be able to take phone for swim without worrying about get it wet.


from xda-developers http://ift.tt/2aDil3C
via IFTTT

[Root] Samsung Galaxy J7 SM-J700P [Boost Mobile]

Voilaaaa! I found a working root method for j700p :D
Download from here :
HTML Code:

http://ift.tt/2aDikN6
How to install :
-extract the downloaded file
-flash CF-Auto-Root-j7ltechn-j7ltezm-smj7008.tar.md5 using odin
-enjoy :o

Credits :
@Chainfire
@thewinelover
@CoffeeNAndroid
@all the testers


from xda-developers http://ift.tt/2artJfR
via IFTTT

Looking for someone to develope an android app for our company

Hello all,
I am looking for someone to develope an android app for our company. We are a towing company and what I am wanting this app to do is have a Rescue Me button that will email the persons location to us. It will also have a place for the customer to fill in aditional details about there issues and location, What kind of service they are requesting and there phone number and vehicle information. If anyone can do this please let me know and give me a price.


from xda-developers http://ift.tt/2artoJZ
via IFTTT

ok so ive been away from the andriod thing girlfriend got me a samsung gear fit 2

i need lots of help as i figured i would, not wanting to be mean to her, told her i loved it however everything i have now is switched to ios. so went bought a cheap andriod phone a zte maven with 5.1 on it installed gear will not sync up with phone im trying to get it to synce up that way i can add apps to it and it can record stuff on my phone and the last andriod i worked with or broke was a galazy 3 thats how long ive been out of the game. i have pictures to include showing you what i have to work with any help would be completely awesome to get this working that i can add apps and have it record stuff on phone i bought thanks..:confused:

Attached Thumbnails
Click image for larger version Name: IMG_0683.jpg Views: N/A Size: 253.1 KB ID: 3829756   Click image for larger version Name: IMG_0684.jpg Views: N/A Size: 267.2 KB ID: 3829757   Click image for larger version Name: IMG_0685.jpg Views: N/A Size: 266.1 KB ID: 3829758  


from xda-developers http://ift.tt/2aHoWel
via IFTTT

Google Account Bypass

Is There Any Easy Way That I Can Bypass Google Account. :confused:


from xda-developers http://ift.tt/2ak6jK5
via IFTTT

can i writ and save to SD card in marshmallow 6

i wonder if i can writ and save to SD card in rooted marshmallow 6


from xda-developers http://ift.tt/2aHp4uf
via IFTTT

Will Marshmallow lock the bootloader on my T-Mobile S5?

Sorry if these are dumb questions... I have searched unsuccessfully for answers here and I am new to the forums and to Android... not sure where to ask this...

I just bought a new (unsold stock) T-Mobile Samsung Galaxy S5 (SM-G900T) phone and activated it on the T-Mobile network. The phone came with G900TUVU1ANE6 (4.4.2) from the factory. After only a few hours of operation T-Mobile has pushed an unnamed update to the phone which I assume is G900TUVU1GPE1 (6.0.1) Marshmallow. I have postponed installation of the update but don't know how long I can postpone it or if I can prevent its installation.

Will installing Marshmallow cause my S5's bootloader to become locked? I ask because I found this on Wikipedia (link not allowed) "As of Marshmallow, the Android Compatibility Definition Document contains new security mandates for devices, dictating that those that are capable of accessing encrypted data without affecting performance must enable Secure boot and device encryption by default".

Or is my G900T's bootloader already locked? I ask because I found this at root my galaxy dot net (link not allowed) "If your device's bootloader is locked then you will get the update via OTA. [...] If your device is rooted or bootloader is unlocked then you have to manually Flash / Install Official Android 6.0.1 Marshmallow Firmware On T-Mobile Galaxy S5 using Odin Flash tool".

The second question worries me more. I bought a T-Mobile S5 because so many sources claim the G900T bootloaders are unlocked. Now I'm unsure. Is there an easy way to determine if my bootloader is locked or unlocked? (I have Heimdall available on a Linux laptop but no windows machine).

I hope to install CM10 or CM13 on my S5. Thanks in advance for any definite information or guidance anyone can provide.


from xda-developers http://ift.tt/2ak6cxV
via IFTTT

Xposed and device admins

Hello
I was trying to replace a method in a device admin package, I used XposedBridge.log("Loaded package: " + loadPackageParam.packageName); at the start of the handleLoadPackage to log it, but it was never called with the device admin package. It is called with other packages but not with that package. I don't know what I am missing here.
the module is enabled in the xposed modules.
any help appreciated.


from xda-developers http://ift.tt/2aHp3X6
via IFTTT

Help with Custom Binary Blocked by FRP lock

How do i repair this custom binary blocked FRP lock?

It started when i tried to install the lucky patcher app, i accidentally turned off my OEM debugging(i think) after i rooted my phone. I think it would not be necessary for me to turn it on since i have already rooted my phone. Then after i installed the lucky patcher it say that something about booting the device then the Custom Binary Blocked by FRP lock showed up and got stuck in prompt message for samsung s6 edge+

i tried to use the root again my phone but end up stuck agian, which apparently did nothing and might trip the system of my phone. I search tons of solutions on the internet, but mostly is to flash my ROM in odin. I have downloaded the files for the firmware which is 1.8gb, and ofcourse followed the procedure to plug my device and use AP(my firmware that i just downloaded)

and this always shows up:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G9287CDXS2BPE1_G9287COLB2BPB4_G9287CDXU2BPB4_HOME. tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)


now i dont know what to do, it always fails to flash my device.. im so freaked out :crying::crying:

anyone please help :(


from xda-developers http://ift.tt/2aa7i1W
via IFTTT

[ROM][OFFICIAL] Zephyr OS [6.0.1_r52][07/31/16]

Zephyr-OS
An AOSP-RRO based rom compiled with SaberModTC

FEATURES:-

Code:

STATUSBAR
-Carrier Label
-DT2S on statusbar/lockscreen
-Quick Pulldown
-Battery icons
-Clock & Date customisation
-Network Traffic indicator
-status bar brightness control

NAVIGATION/RECENTS
-DT2S on navbar
-recents panel search bar toggle
-Clear all recents fab (top right/left/center,bottom right/left/center)
-Hardware buttons action( for HWnavkeys  devices only)
-Longpress recents button to switch between apps

LOCKSCREEN
-Middle Lockscreen shortcuts(Custom apps)
-Quick unlock
-Music seek control when screen locked
-Volume rocker wake
-LockScreen Music Visualizer
-Music Visualizer custom colors
-LockScreen bottom shortcuts

NOTIFICATION DRAWER
-Customize quick settings tiles(add/delete/rearrange)
-Brightness slider toggle
-Advanced QS location tile
-Vibrate on touch
-Four tiles per row toggle
-toggle status bar icons
-Time contextual Headers
-Default Zephyr Header
- Disable Quick Settings in secured lockscreen

What else?
-viper4Android
-GESTURES (Hand Wave/Pocket mode)
-Heads-up toggle
-Dashboard switches
-LAYERS for theming
-Per app expanded desktop control
-Multi window mode
-light and dark theme toggle
-FORCE MOVE apps to SDCARD
-Download Speeds for your downloads
-Ability to pause/resume downloads
-Custom Ambient Display settings
-AppOps/Privacy Guard


Downloads

Changelogs
Keep an eye on this!!

Gplus
Get to know about the latest updates here!!!

Quote:

How to flash?
- Download the rom and gapps
-Boot into recovery mode [TWRP]
- Wipe System/Data/Dalvik Cache/Cache
- Select both the ROM and [B]Gapps[B] zip file
- Flash it!!! Reboot it!!! Enjoy it!!! :D
NOTE:- CLEAN FLASH IS RECOMMENDED

BUG REPORTS
-Any bugs?? let me know :)
-Report bugs with LOGCATS or screenshots only, else it will be considered invalid.
-DO NOT REPORT BUGS ON A DIRTY FLASH!!!

Credits

Code:

PrinceTrishi(StarkDroid)
Sri Harsha
Akhil Narang
Adarsh-MR (designer)
AOSP-RRO(base rom)
BrokenRom
SAOSP-M
BenzoRom
AOSIP
SlimRoms
CyanogenMod

XDA:DevDB Information
Zephyr OS for victara, ROM for the Moto X 2014

Contributors
firepixel
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP-RRO

Version Information
Status: Stable
Current Stable Version: 4.2
Stable Release Date: 2016-07-31

Created 2016-08-01
Last Updated 2016-07-31


from xda-developers http://ift.tt/2aUHxA6
via IFTTT

ASUS Zenfone 2 is stuck on factory resetting!

My phone (not rooted) factory resets between 12-24 hours (according to others). But my phone has been "erasing" for more than 28 hours??!? Unbelievable. It is still stuck on "erasing". :crying:

Asus Zenfone 2 (ZE551ML)
Intel Atom CPU
64GB

Had it for 3 months.


from xda-developers http://ift.tt/2aUIc4r
via IFTTT

Kernel with USB Host support

I'm just one step before USB OTG, I miss only the Kernel.
There is any recent kernel with USB Host support for CyanogenMod 11?


from xda-developers http://ift.tt/2aa5JkB
via IFTTT

Hard bricked. Won't charge, PC doesn't recognize

Hard bricked. Found my phone in my car. It's been through the cold and hot weather. It's an old phone, but I would like to revive it.

Won't turn on. Can't charge. I tried a new battery..same applies.

Also, PC and Odin does not recognize it. Any help?

Phone was rooted with AllianceRom. No signs of wear/leaking on the battery. Was working perfectly before I abandoned it...:(


from xda-developers http://ift.tt/2aUHtAm
via IFTTT

4g or LTE???????

Hi,well,my question is this:

I've flashed my Xperia X with the .277 firmware in order to root,so i picked up a generic one,to be more specific i have this on my phone right now: F5121_Customized GEL_1302-6571_34.0.A.1.277_R5A

i did'nt noticed it,but now the signal shows LTE,when i had the previous firm it showed 4G,also when i make a phone call the signal changes to H+ or 3G.

So which one is the best? i've searched but i'm still confused,and,yes my operator supports 4G and LTE aswell.

Thanks.


from xda-developers http://ift.tt/2aa5W7v
via IFTTT

Video/Audio downloading for Android

Does anyone know a good app for downloading video or audio files? Or if one even exists for an unrooted device?


from xda-developers http://ift.tt/2aUHkg9
via IFTTT

[F31xx][Video Guide] How to root your Xperia XA (as noob friendly as possible :) )

Hi all

As requested I make a "how to" video to be more noob friendly, the video is probably not perfect and my English too but I do my best to be understandable to all :)


PLEASE READ
I'm not a dev and I have no responsability if you flash my files.
As said in the video you must wipe "userdata" partition when flashing IF your phone memory IS crypted or if you don't know the uncrypt password, someone on the web speak of "default password" but what is it ?? If cryped (with no password) you can't backup /data and can't mount internal memory in TWRP. You can manually enable encryption and be able to set YOUR OWN password, but you can't revert back. And in theory you can make full nandroid backup and mount /data partition when in TWRP but can't mount inernal memory.
Regarding mounting /system rw in TWRP, seen on other tuto, you must never "swipe to allow modification" when prompted, after installing root package /system is mounted rw with no problem (look at "mount" menu).
IF YOU UPDATE OR FLASH STOCK BOOT and power on the device to Android, it will encrypt again the internal memory and if you shutdown the device before the end (xperia screen for hours) it will corrupt your data, not the SD card).
For futur, if you want to update, ask me and will release modified boot. I don't know what it does if you update stock after setting password encryption :/

Why I changed that by replacing "FORCENCRYPT" by "ENCRYPTABLE" in fstab Boot:
http://ift.tt/2aa5LJv
and
http://ift.tt/1YeI3wp

Before continue, you must understand that unlocking your BootLoader will void your warranty, break your device DRM and lose X-Reality and image optimisation on low light when taking pictures (seen some workaround but not for XA).
You can't re-lock your phone and it will not restore DRM.
If you have confidentials files in your phone don't unlock your bootloader, as long as your phone is locked your data are officially secured.
This will be repeated when following Sony step by step guide. YOU ARE AWARE !

To verify bootloader lock state after unlock, on phone dialer:
*#*#7378423#*#* ---> Service info ---> Configuration ---> Check for "Bootloader unlocked: Yes" IT MUST BE YES !!!

By rooting your phone you will be able to install/uninstall system apps, install Xposed framework (Gravity Box, Dark Pokemon Go,...) or Viper4Android for an awesome sound! You can tweak and mod your phone deeper (battery,CPU,...), build and flash custom ROMs and many other things :D
If you have problems or want to unroot you can flash stock firmware like in the video with Flashtool, no need to wipe userdata.

Please watch my video one time before begin, to understand what you have to do.
Free to you to distribute or modify my files but please link this thread as source.

BY FOLLOWING THIS GUIDE YOUR PHONE WILL PERFORM A FACTORY RESET WHEN UNLOCKING BL ( it will not format SD card) , MAKE BACKUPS !

Tested on my device F3112 and reported as working on F3116, other models may work as well if you do ALL steps. Will confirm after positive feedbacks.

Let's begin!

YOU NEED:

My first video guide :) (will be on youtube after validation) : http://ift.tt/2aa6daC

Download XA ADB drivers, all models for Windows
http://ift.tt/2aa67jn

Download XA Fastboot drivers, all models for Windows (if needed, installation is same as ADB drivers in video)
http://ift.tt/1r2VbT2

Download FLASHTOOL with integrated Xperifirm 0.9.22.3 for Windows
http://ift.tt/1i7bFKD
(if needed you can unlock bootloader with it, I unlocked my device with it)
Just follow official way and when you get the unlock code, paste it in UB menu of Flashtool. (faster way)



The step by step guide to unlock BootLoader by official way:
http://ift.tt/1nc673c
Video (not mine): https://www.youtube.com/watch?v=6lKWd5LlUoA
(Just select Xperia XA when asked)

Now depending the firmware you want to root ( the one you downloaded with Xperifirm) choose your rootpack:

For XA single sim (33.2.A.2.xx) = F3111, F3113, F3115

33.2.A.2.73: http://ift.tt/2aUHdkR (NOT TESTED)

For XA dual sim (33.2.B.2.xx) = F3112,F3116

33.2.B.2.35: http://ift.tt/2aUHEf4
33.2.B.2.73: http://ift.tt/2aUGTmc


Good luck :)


from xda-developers http://ift.tt/2aa5NRr
via IFTTT

has anyone figured out the advanced calling problem with rooted phones?

it keeps telling me i have it, but can not activate it.


from xda-developers http://ift.tt/2aa5MNn
via IFTTT

G930V ROMs?

So now that I'm running a rooted S7 on Verizon (G930V), I'm looking into custom ROMs. Everything I can find seems to be for other variants. Is there anything for the G930V? I can't seem to figure out how to tell when most of the ROM's don't specify. :confused:


from xda-developers http://ift.tt/2aUH8gQ
via IFTTT

Android stereo update, need help, don't know what firmware I need

Hi everyone, I got a stereo from eBay last year and it's currently on 4.4.2 and it just looks out of date, wanted to update it to the stereo that was in the description on eBay, I believe that one is just more up to date, I have the info I got from my head unit, any help would be much appreciated.

Any direction where to get the right firmware would be greatly appreciated

Attached Thumbnails
Click image for larger version Name: image.jpg Views: N/A Size: 182.4 KB ID: 3829743  


from xda-developers http://ift.tt/2aUEIyX
via IFTTT

Android dump image file with no extension

Hi. I am completely layman with programming, and I am struggling with recovering smart phone data.
I tried to extract dump file using Oxygen forensic suite, but what i got is 'mmcblk0' 29GB file with no extension
and Oxygen Forensic result gave me anything which i wanted to recover DCIM contents.
I don't know how to use it or amout virtual disk.
Is that file useless? can i add extension? or use somehow?


from xda-developers http://ift.tt/2aa3vSD
via IFTTT

Stuck on "erasing", took longer than 24 hours and still stuck.

(NOTE: My phone is not rooted)

My ASUS Zenfone 2 is stuck at the "erasing" screen. When I started the factory reset, it went to the "erasing" screen. After reading other threads, I thought it was normal to format between 12-24 hrs. It has been about 28 hours, with my phone plugged in while formatting, and it is still stuck...

All methods, including hard reset and recovery mode took me back to the same screen, and still stuck. Can anyone help me? :crying:


from xda-developers http://ift.tt/2aUFDzh
via IFTTT

[Help] fastboot error "Loading keystore failed status 5 [600] USB init ept @0x8f2270"

ok so i have a device, LG spirit H440n.
and i cant get it work.
if im trying to get into download mode, make a factory reset through the stock "recovery" mode or to boot normally i get this:

boot certification verify
Secure bootung Error!
Cause: boot certification verify.


i just cant do anything.
but i can enter fastboot mode. but when i enter i get the following:

fastboot_init()
Loading keystore failed status 5 [600] USB init ept @0x8f2270
udc_start()
-- reset --
-- portchange --
fastboot: processing commands


from there i cannot apply fastboot comands. if ill send "fastboot devices" i can see the device attached.
if i send "fastboot reboot" i dont get any error but device doesnt reboot, i just see in the device screen a new line "fastboot: reboot".
and if im trying to flash somthing i get an error "failed remote unknown command".
any solution?


from xda-developers http://ift.tt/2aa3Gxb
via IFTTT

Can only boot into TWRP after SuperSU Update

Hey Team, was hoping I could get some assistance. I updated SuperSU (was prompted to) and now I can only boot the phone into TWRP. If I tell TWRP to reboot system it still only boots into TWRP. I think this is probably something simple, but I don't have a clue.

Thanks ahead of time.


from xda-developers http://ift.tt/2aa3nm4
via IFTTT

Camera system app

HELLO .

please can someone help me:(:(:( because i lost my camera system app (gallery2.apk ) in my elephone m2 i wonder:confused: if someone can give it to me or give me a downloading link:crying::crying::crying:


from xda-developers http://ift.tt/2aUF9Jo
via IFTTT

OPO Not Charging and Battery Stuck at 50% After Water Damage

Just a few hours before I had proclaimed how great my One is and how I have not had any problems with it, I entered a swimming pool with my OPO in my pocket. I immediately went and bought some rice. I wasn't able to open the back completely because I didn't have the tools to remove the SIM tray.

After a few days, I tried booting it and it showed a message that the battery was too low (pic) and then it would keep rebooting itself.

I thought that the battery was messed up, so I replaced it. Now it turns out that everything works perfectly fine (screen, speakers, camera), but the new battery (and maybe even the old one) does not seem to be charging. What's even more weird is that it will only show me that it is charged 50%.

The phone seems to recognize that it is connected to a power outlet. When turned off, I can click the Power-button once and see that it is "charging" and at 50%. When turned on, it does not appear anywhere that it is charging. No notification light, nothing on the status bar, and "50% - Not charging" in Settings>Battery (when plugged in) and "50% - approx. 12 hours" (when not plugged in). Also, in Settings>Battery>Battery optimization it says that "battery optimization not available" for Google Play Services.

I have obviously plugged the battery connector back in when I replaced the battery, but I don't know if I need to replace the Micro USB Port or not. It seems like it is recognizing when it is plugged in, but it's simply not charging.

What do you think I should do? Thank you!


from xda-developers http://ift.tt/2aD9ZsG
via IFTTT

why theres no modded 2 big cores disabled TOT for USA variants?

who modded the TOT file? whay we dont see one for us in the USA.?


from xda-developers http://ift.tt/2aD9pvo
via IFTTT

Moto X Root Question

Hello, I have a question about rooting my Moto X v5.1 (build LPAS23.12-39.7-1). See, it was bought from Verizon, but it is unlocked, so I switched to T-Mobile, not sure if i'm suppose to follow the root tutorial for Verizon models still. I entered the recovery mode and saw that the bootloader is indeed locked. Sorry i'm really new at this and pretty confused, if you need any more info about my phone please ask and I will provide. Also, if you have a tutorial link that would be great as well, seen too many that have different steps than each other and don't want to brick my device. Thanks a lot!


from xda-developers http://ift.tt/2arl5Of
via IFTTT

Cannot boot to bootloader mode

Hello guys. I really need soem help on this. After trying a whole day and looking at plenty of sources (heck even other phone forums), I've failed to unlock my bootloader. I've tried running the command
HTML Code:

adb reboot bootloader
and failed countless times. Any suggestions? Also, yes I've selected USB debugging and OEM unlock in developer options. Thank you.

Phone model: LG H960A
OS: Android 6.0


from xda-developers http://ift.tt/2aD9eQs
via IFTTT

{new} vorke v1 windows 10 mini pc review

Vorke V1 Intel Braswell Celeron J3160 4G RAM 64G SSD Windows MINI PC 802.11AC WIFI Gigabit LAN Bluetooth4.0 HDMI & VGA Output USB3.0 - Black









Hi Guys & girls.

Here we have the new Vorke V1 Windows 10 mini pc from Geekbuying.


First of all i must thank the guys at Geekbuying for the review sample to test.This device has been a joy to tinker with

The Vorke V1 arrived in just over two weeks via snail mail with no customs to pay this time :)

If you go for this Awesome mini pc i would go for the cheap & slow postage as with DHL you would more than likely to incur some big customs charges..


Highlights (From Geekbuying)



Celeron J3160

Celeron J3160 , a quad-core processor, operates between 1.6 and 2.24 GHz. Under the hood, it packs 2 MB of L2 cache, TDP of 6W and re-GPU HD Graphics 400.


DDR3 4GB RAM, 64GB SSD, Both Extendable

It boasts DDR3 4GB RAM, 64GB SSD, advantageous in performance, security and reliability, ascribing to the eMMC memory, ultimately delivering a richer end-user experience.

RAM can be extended to 8GB, SDD unlimited, HDD 1TB.


Gigabit LAN

Gigabit LAN provides a data rate of 1 billion bits per second.


Applications

Office Work: Office, skype, yahoo, outlook and all other office requirement support and runs perfectly.

Design Work: Photoshop, CoreIDRAW, Dreamweaver, IIIustrator, Flash, Indesign and others.

Game Playing: Support most of the online games and PC games, like Warcraft, Counter-Strike (CS), support 3D games.

Entertainment: Support 4k video play, XBMC and others.


Windows 10 Activated



The vorke V1 comes with a power adaptor, charging cable & some basic instructions (No HDMI lead)

The first thing you will notice is the size & weight of the V1.This is a quality bit of kit i can tell you.Its bigger than I was expecting but boy is packed with goodies, I love how you can completely dissemble the whole thing.

The device weighs in at just under 14oz & the Dimensions are 153.4*153.4*38mm/ 6.039*6.039*1.496inches

Once i had unpacked the V1 its time to start seeing how this device preforms.

Its great to be able to weather i use the HDMI or the VGA port thats another good thing about the V1 or use them both at the same time.




The first thing i did was a windows updates that was an easy process & took just under 1 hour to be fully up to date.The next important thing i did was to do a driver backup using double driver (Link below for my driver backup)

Vorke V1 DD Backup


Also latest driver & Bios on Geekbuying blog

Vorke V1 Drivers & Bios



Now time to have a play the vorke v1 boots up in just over 30 seconds so no pain staking waiting around for it to boot up,Juts press the power button and sit down & your up & ready.

Its good to see the 4GB of ram & the 64GB rom & the best bit is both the ram & the rom can be upgraded so suit your needs.


WIFI & lAN



The wifi on the Vorke V1 is strong & constant not had one issue & if you want to go down the wired option you can use the (Gigabit LAN) that provides a data rate of 1 billion bits per second.


Ports & connections

The V1 has 4 USB port with 2 of them being the USB3 ports

Its nice to have 2 full sized USB3 ports on the rear for the faster data transferring etc etc

Power button the the top (I would of liked to see this on the side but thats my personal choice)

Power connector on the rear with the HDMI port,VGA PORT,rj45 port & the 3,5mm headphone socket

The V1 has ventilation holes on both side's of the device to help draw out the warm air.

When your looking to buy any windows or android tv box for that matter you need to be looking for a box with plenty of ventilation holes or you will be having over heating problems from day one NOT WITH THE VORKE V1 with all the ventilation holes and the internal fan doing a great job.


About the fan you going to ask how loud is it? Well i dont have a sound meter but so i cant tell you the sound level but i will say yes you can hear it some will say its too loud in my case its no louder that my desktop & after a wile you do not notice its there.


Some internal photos


Wow on dissembling this thing you really see how well made it is















Iv been using this thing as my main pc for the past week & its done everything iv asked of it everything works so dam well & fast..Kodi runs sweet (Always does on windows)


Iv tested a few games like Asphalt 8 & beach buggy racing both play very well even with the graphics set to high Thats using my Tronsmart Mars G01 Game pad (Windows picked up the game pad with out problems everything is so straight forward


What works

64GB sd works
120GB SSD
128GB USB Stick
Samsung 1TB unpowered HD works
Tronsmart Mars G01 Gamepad works
Logitech c270 webcam works


Overall i would say where the V1 shines is video play back iv watched 6/7 films back to back with out fault,lag or stutter & no over heating on the v1 it does not even get warm so i would say the internal heat sink & fan is doing its job very well (so no heat sink mods required on this device)


I use an app on my android phone called unified remote to control my all my windows based devices its very simply to use it has mouse & key bored input i highly recommend trying it.
http://ift.tt/1MWBIi0


Some tech stuff

Starting with the internal FORESEE 64GB SSD speed test



The same test with my 120GB Integral SSD



And now with a cheap USB3 stick




CPU Z



HW Monitor



Real temp





Specification

General

Brand Vorke
Model V1
Colour Black


System

Operating System Windows10, Supports WIN8.1/ubuntu15.10&16.04 Chrome OS
CPU Braswell J3160 1.6GHz
GPU Intel® HD Graphics 400
RAM DDR3L 4GB (Can be extended to 8GB)
ROM 64G mSATA SSD(Endless extension for SSD, 1TB extension for HDD, Support 2.5" SSD)
Sound Codec Chip ALC269


Communication

Wifi Connectivity 802.11ac wireless internet
Ethernet 1000M LAN
Bluetooth 4.0
Card Reader RTS5159


Media

Video Supported 3GP,AVI,H.264,MP4
Audio Supported AAC,ACC,MP3,OGG,WAV
Picture Supported BMP,GIF,JPEG,JPG,PNG
Office Format Excel,PPT,Word
E-book Format PDF,TXT


Interfaces

HDMI Port Standard HDMI Male 1.4b
Wake On LAN Yes
Other Interfaces USB2.0 x 2
USB3.0 x 2
Headphone out & Mic-in x 1
VGA x 1
LAN 10M/100M/1000M x 1
TYPEA HDMI x 1
IR x 1
Power Button x 1
DC-IN x 1
LED Indicators White LED lights power on
White LED lamp power off
White LED breathing sleep s3


Other Features

Power 19V/2.1A or 12V//3A
Others Skype: Supported
Youtube: Supported
Speaker: Supported
MIC: Supported


Dimension & Weight (Main Product)

Dimension 153.4*153.4*38mm/ 6.039*6.039*1.496inches
Weight
390g/ 13.75oz



Whats in the Box

1 x VORKE V1 MINI PC
1 x Power adapter
1 x Charging cable
1 x User manual


Basic Unboxing Video






A lot more to come on this one...


from xda-developers http://ift.tt/2arlccF
via IFTTT

Android Auto USB connection problem ?

Is there anyone success in connecting this phone to a car using "Android Auto" ? I try many roms in the kenzo development section but none of them makes the phone being detected by the car through USB. I had another Mi Note Pro on the CM13 rom and the phone is connected to the car through USB cable.


from xda-developers http://ift.tt/2aD8YRp
via IFTTT

Ported AT&T from Cricket (AT&T), nxtgenphone APN gives no data?????

So I jumped on the AT&T/DirecTV Unlimited data deal and ported my phone today. It all looked normal and I got the activation texts and such - it even populated the nxtgenphone APN info (though it was deselected and I had to select it). Anyway, I've had no data at all. As a test, I switched the APN to phone and data works, but the speeds appear to be much lower than what my wife's iPhone is seeing on the nxtgenphone APN. Anyone got any tips?
I'm running Viper 2.5, latest US unlocked firmware and US unlocked selected as carrier, and it works fine on AT&T other than this......only other thing I can mention is when I select preferred band or whatever it shows WCDMA/GSM and if I change it to WCDMA/GSM/LTE it reverts back for some reason. Any help much appreciated. I've called AT&T and they're like, uh, we don't sell the HTC 10 so can't really help you... grrrrrr.....


from xda-developers http://ift.tt/2arkUCM
via IFTTT

I need help with app

Hello . My problem is that I have app and I would like to make something like bot . Bot should save time when I'll get any Notifications from that game and get into the game to send me more details of that notification . I mean . Some1 is attacking me and normal notification is "Someone is attacking u" . I would like to get notifications like " That person is attacking your base number ### and attack is coming from ### and it'll be at our base at ###" . Do u know any apps which can do that or can u teach me how to do it ?


from xda-developers http://ift.tt/2aD93Vg
via IFTTT

[ROOT] Whatsapp Trick: How to enable some hidden feature

Hello everyone,
I am writing to share a few tricks that I have found to enable the following functions in Whatsapp:
- Video calls
- Group's invite links
- Two steps authentication in Whatsapp Web.
First of all you need the latest version of WhatsApp Beta (for example, I use the 2.16.213) and a root explorer.
You have to open the root explorer and edit the file com.whatsapp_preferences.xml inside /data/data/com.whatsapp.
You need to add the followings lines inside <map></map>:
Code:

<boolean name="group_invites" value="true" />
<boolean name="video_call" value="true" />
<boolean name="video_calling" value="true" />
<boolean name="two_factor_auth" value="true" />

Then save and force close Whatsapp from the list of applications on your phone and you are done: you unlockee the hidden features!
I hope this guide has been helpful, and I apologize for my bad English (I'm Italian).
PS: Currently you can only unlock the graphics of video calls, because the servers to which they connect are still down.


from xda-developers http://ift.tt/2arkH28
via IFTTT

need your vote for active root

please vote for 6.0.1 root at this link

http://ift.tt/2arkJXS


do it as soon as possible root almost ready according to messi


from xda-developers http://ift.tt/2aD9kYC
via IFTTT

WhatsApp problem

Hi to all. I'm noticing a bug of WhatsApp that is very annoying: although a group is muted, continue to arrive the heads up notifications by this group.

I've tried a lot of solutions, but they are uncomfortable in my daily use of WhatsApp.

Anyone can help me?

Attached Thumbnails
Click image for larger version Name: Screenshot_2016-08-01-00-02-18.jpg Views: N/A Size: 118.9 KB ID: 3829714  


from xda-developers http://ift.tt/2arkjAW
via IFTTT

root for 6.0.1 almost ready

first step for root is ready , i need someone to upload stock mm boot.img



please all the galaxy active 6.0.1 owners go and vote for this root as soon as possible at the link in the bottom.

guys please vote here for which os you need root



VOTE HERE:

http://ift.tt/2arkJXS


from xda-developers http://ift.tt/2aD9sr2
via IFTTT

Audio issue, please help

Hello to everybody, thanks for reading.
I will start with facts: on one hand, i have my desktop pc connected via hdmi to my tv, whose analog audio output is connected to my speakers. On the other hand, i also have a Chromecast 2 connected to the tv.
So in both cases, audio output is the same, BUT sounds different (and here's the issue).

For example, when i play anything (netflix, Spotify) through my computer, sound is fine, perfect. But when i do it via Chromecast through my android phone apps, sound is definitely worse: louder and a little bit distorted, like noisier.

I guess that the difference should be on Chromecast or phone audio driver (apparently working worse than pc drivers). But i don't even know if phone's audio is relevant here or not.

What do you think? What can i do? Thanks!


from xda-developers http://ift.tt/2aD8CKD
via IFTTT

What can't FlashFire flash from Nexus 5X factory images?

I want to have a rooted stock Android Nexus 5X with stock recovery. I also want to keep my boot loader locked. But I've read that automatic OTA updates don't work on a rooted phone. Then I found out about FlashFire.

But I also read that FlashFire doesn't allow flashing of the radio and boot loader. Chainfire himself said "FlashFire can flash both bootloaders and modems on most Nexus devices. However, I would only flash the modem and not the bootloaders, to be on the safe side. Or, use the full size OTAs available from Google rather than the Fastboot package, and circumvent the issue (those flash both bootloader and modem if necessary, with less risk when doing the bootloaders)."

So I've got 2 questions:
1. Is it possible to flash everything, including the radio and boot loader on the 5X?
2. If the boot loader is flashable, what are the potential drawbacks of flashing it with Flashfire instead of fastboot?

Thanks


from xda-developers http://ift.tt/2arlekX
via IFTTT

Can someone please upload the stock version of the Kindle app?

I mistakenly deleted the stock Kindle reading app in the Amazon Fire. Now no other version works. I tried installing from the Play Store, but it closes immediately after opening. I tried also with older versions and the result is the same. Only thing left is to try to reinstall the stock version, to see if it works again. Can someone please upload the .apk? I'd appreciate it.


from xda-developers http://ift.tt/2aHgj3e
via IFTTT

Question about a particular scenario - talk, data, and MMS at same time?

The group that I work with spends a lot of time on conference calls together, and lots of time sending group text messages to each other. We often need to be researching something on our phone at the same time.

We have one guy on Verizon and he won't get any texts until he hangs up his iPhone.

We have another guy on Sprint that will get individual texts during a phone call, but not group texts or picture texts on his iPhone.

I'm on AT&T with an HTC M8 and I'm able to do all three at the same time. So is another AT&T iPhone and a Galaxy S6 in the group.

I think this is a network issue, but I'm not sure.

Can anyone on AT&T confirm that this phone is able to send/receive group text messages while simultaneously using voice and data?

Thanks!


from xda-developers http://ift.tt/2aD6vq8
via IFTTT

[ROM] Phoenix 1.0.9 RC (Android 6.0.1) Fully Functioning Windows)

Hi all you Nexus 7 flo diehards. First I am not a dev, but I would like to get testers of a Marshmallow ROM that has truly functional windowing.
The devs at Chaozhuo have released it. I have been using it for a while and it is fast and fluid and reliable.
Check their website at http://ift.tt/2aD6J0t
For all of you with TWRP recovery I have a link to a TWRP backup that will allow you to begin testing it.
http://ift.tt/2aD6rqL
This is a fresh install. A few problems right now:
1 No Google Play Services or Play Store
2 No launcher, just a desktop (LMT launcher does work)
3 Not rooted but you can flash SuperSU
Give it a try and post your comments in this thread.
I am a senior XDA poster so you can trust the download.
If you're happy then please hit the thanks button. And don't forget to post here good/bad experiences.


from xda-developers http://ift.tt/2arit2X
via IFTTT

Microphone mute during phone call and screen off

Hi Everyone -

While on a call, if the screen goes off (by putting the phone near your ear or screen timed out), the microphone seems to be automatically muted, the other party could not hear me; when the screen is on again, they can hear me.

This problem occurs after having used Google Now voice search. I rebooted the phone, mic still works after the screen goes off; but when I make a Google Now search using voice, the problem occurs from then on.

I've turned off auto "OK Google" detection, but the problem is still there.

Does anyone have the same problem and have you found a solution?

Thanks!


from xda-developers http://ift.tt/2arifIX
via IFTTT

Can't turn MIDI usb mode on !! PARANOID ROM

I'm trying to switch it on so i can use it as a microphone for pc using WO MIC. It works just for 2 seconds before the connection is lost and i can realise the usb mode is switched back to file transfer.

Right now im switching to h2os back, hope it will work on it. Any other solutions i should try ? Tried both debug mode on/off.


from xda-developers http://ift.tt/2aD6CCf
via IFTTT

How can i simply force close open/running aps?

Is there a solution to this yet? Either from the system itself or from downloading or sideloading a specific app to close them?
This is still Android so there should be something to force close apps like our phones.


from xda-developers http://ift.tt/2ariFza
via IFTTT

Saturday, July 30, 2016

Hijack Suite (Q&A)

It is an xposed module capable of spoofing some of the identities of an Android device.
Customize the identites to your own choices!

Download Here : http://ift.tt/2amAdyi

Below are the supported identities :
- Android Id
- Serial Number
- IMEI
- MAC address
- Device build number

Another interesting option available is, ability to randomize the identity for different processes.
It just hijacks the identities on the fly. Hence the original valules are not modified.
Once the app is disabled, get back all the original ids.

How to use!
You need to have an android device which is rooted and has Xposed framework installed.
Open Hijack Suite and enter custome values for the identities.
Press save.
Goto Xposed installer app.
Enable 'Hijack suite'
Reboot the device.
View the customized values being replaced at places where they are tried to fetch.(Check using different apps.)
Observe the behaviour of the app under test by changing the id values.

Disclaimer
Please try the app only if you can understand the above description.
It is built for Android application security testers. (pentesting)
Do not use the app for any illegal purpose.
Use the app at your own risk.

Thanks to rovo89 for developing the wonderful XPOSED framework.

Keywords : Change Android ID, Change Serial number, Change imei, Change MAC address, Change Device fingerprint,
Mask imei, Mask identity, Spoof identity, Hijack id


from xda-developers http://ift.tt/2alE0c5
via IFTTT

[Q] How i can modify TWRP or CWM (Allwinner A10, Arnova 7 G3)

Hi guys! :p

Since I've found my old tablet(an Arnova 7 G3 based on Allwinner A10 SoC)
I tried to find some custom rom and recovery etc... and i found a TWRP and a CWM (not for my tablet but compatible).
They work perfectly (flashing "command" in /cache/recovery like --wipe_cahce, screen, adb etc) but not the touchscreen (for TWRP)
On Sunxi.org, I also found a driver (.ko files if i remember correctly) for the touch screen, and I'd like to add it on TWRP or CWM but i'm a noob for every things like compile an custom rom and recovery etcc...
Anyone can help me to find how I can do this or help me to re-compile this recovery (TWRP or make a touch CWM)

Thank you, Tristan

P.S: Sorry if for my bad english.
P.S2: I did a French topic on PhonAndroid.fr but for this moment, it's like a draft thread)
P.S3: On this tablet, there aren't any vol button


from xda-developers http://ift.tt/2amA7XP
via IFTTT

Updated H810 root?

I sent in my phone to be repaired after it got stuck on the bootloop problem that's been caused by their hardware failure. It just returned to me today and it's been updated to build number: MRA58K... Software version: H81021x. Can this version be rooted? If not, is downgrading the only way and is it possible to downgrade and root it again?


from xda-developers http://ift.tt/2alFXFe
via IFTTT

Big problem with IM's (viber and whatsapp) and push notifications

MY girlfriend bought this phone a month ago.

There were problems from the start - sometimes, but rarely, she didnt receive notifications from both IM's she is using, Viber and Whatsapp. Only when she enters the app, she sees that there are actually new messages - I checked Emotion UI settings for Battery manager and both apps are protected from the start (should work in the background). It wasnt such a big deal until today when she noticed that not a single message (7 viber and 2 whatsapp messages) didnt "go through" and only when the app is opened, she sees the message received. On top of that, problem got even bigger in the evening - in the middle of chat session, she doesnt even receive messages, until certain delay. I checked, it was not mobile data/wifi issue as everything else was working fine, one phone next to another, I send her a message and her's phone doesnt receive, while her phone is pretty much able to run a 1080p video from YT

Any solution to this .. ? she needs Viber very much as her work group from her job uses Viber extensively and she cant afford to miss new messages

tried: restarting, checking for EUI blocking apps, checked data/wifi for always ON on sleep, checked everything there is ..

pls help XDA!


from xda-developers http://ift.tt/2aAGjMQ
via IFTTT

Question about edits to my apn

So I've been reading about how users here are able to edit their apn under settings on firmware PF2 but im on PF2 also and all my apn's are greyed out, along with the "add" button. I've read that users dont have to be rooted in order to change their apn's, so im not rooted either and I still cant edit them. Is there something that I'm missing? Does it have something to do with a my msl and a edit in my dialer under the ##data## menu?

Sent from my SM-G930P using Tapatalk


from xda-developers http://ift.tt/2aoXOwC
via IFTTT

Sony Xperia Aqua E2306 Bootloader

So my M4 is the E2306 version and it says Bootloader Unlock Allowed: No but theres an option in the dev options to turn on OEM Unlock. I turned that on and tried unlocking it via fastboot but got "Command Not allowed" then i tied flashtool and it seemed to work but now the Root Status in service menu just says unavailable. Any idea how i could unlock the bootloader or what happened?


from xda-developers http://ift.tt/2aAGF6u
via IFTTT

Stuck in Boot Recovery

I tried to use Yemenroot to root my phone and ended up stuck in a Boot recovery and no matter what I try I cant get out of it. What suggestions could anyone give me? Ive tried the factory reset option and the clear cache. neither helped. Thanks in advance!


from xda-developers http://ift.tt/2aoXk9A
via IFTTT

Where to find 64 GB 4G Tab S2?

Does anyone know which countries the 64 GB 4G version of the Tab S2 are sold in? I have looked all over, Amazon.com, uk, de, ebay and Google and have only been able to find it available at an import electronics place on Lake Constance in Germany.... and even though I was in Germany on an extended vacation they didn't allow in-store pickup, their web site would not accept an American credit card and they would not accept Paypal because it wasn't a German Paypal account.

Thanks.


from xda-developers http://ift.tt/2aAGuYx
via IFTTT

Unable to Disable Reactivation Lock but can Login

I have a SM-G900V currently running stock PB1 unrooted and a locked bootloader. My s5 also has Cid with 15 so I am able to unlock. My end goal is to have mm rooted and unlocked bootloader with custom recovery. ;)

Now the issue,

The Reactivation Locked is enabled/checked in security settings with my account which I am able to log into both from a PC and while doing a full reset using ODIN or from stock recovery. During reset it makes me login to setup my phone and I do and move forward with setting up my phone. If I go into Settings/Security and turn off reactivation it asks me to login so I do. It says I'm logged in but the check is still there. It actually disappears then reappears right away.

I have done a dozen full on wipes/resets of both the internal and external SD card using odin but nothing seems to let me disable reactivation so that I can get to MM rooted and unlocked bootloader.

Anyone got any pointers? :)

~me


from xda-developers http://ift.tt/2aoXy0y
via IFTTT

MIUI7 HW fixed some bugs help needed

Hello guys I'm a newbie I tried to fix hw in miui it is fixed (blur and HD videos working) the ROM now looks awesome and it is super smooth. The only bug left now is it is not detecting sim cards and WiFi isn't working please if someone can guide me what I should do.
we will get a stable MIUI


from xda-developers http://ift.tt/2aAGsQp
via IFTTT

Custom ROM For Lenovo Tab 2 A8_50F

I have successfully rooted and installed twrp on the Lenovo Tab 2 A8-50F. Can anybody provide me with a working custom ROM. If maybe make one for me. Possibly CyanogenMod? I would be SO half! Thanks. Hard to find things for that tablet...

Sent from my SM-T350 using XDA-Developers mobile app


from xda-developers http://ift.tt/2aoXQ7J
via IFTTT

Unresponsive Black Screen on Tablet and Phone! Help Please!

Okay, So I have a cubot x9 and a LG G Pad 7.0 LTE and I decided to root these devices and I was successful but after a while I can't remember what happened the devices just got a black screen. I thought maybe they were dead so I tried charging them and i got nothing no charging battery indcator or anything on both devices. No recently I pluged my LG G Pad into my computer and it did show the indicator for like a sec then it died again. I know on my Cubot I was able to install the original Software once but now it doesnt seem to be working. Any Idea what's going on or how to fix it?


from xda-developers http://ift.tt/2al5qVr
via IFTTT

Pokemon Go 0.31 Update Doesn't Work On CM13?

I just updated Pokemon Go, and it crashes right after the Niantic logo. I then updated to the most recently Nightly and it still doesn't open. Has anyone managed to get the newest update of Pokemon Go to work on CM13?

Edit: I'm dumb, I just had to uninstall and reinstall the app again.


from xda-developers http://ift.tt/2azuGV1
via IFTTT

How to get full root access on HTC 802W 5.0.2 ?

I have rooted my HTC 802W.
But when I uninstall the system apps and rebooted the device then apps appeared again !
How I can get the full root access ?
Need your help.
Thank you.


from xda-developers http://ift.tt/2al5lRJ
via IFTTT

Where to Start dissecting Stock ROM?

Hi, everyone. Been a linux sysadmin for 15 years, and have rooted and replaced ROMs on countless devices. I'd like to dissect a factory OTA update and build my own ROM (to share, of course!)

Now I have an Acer Liquid Z320 (Acer T012). There are NO ROMs out there for it. Nothing. However, I do have an update.zip factory update. The structure of this is pretty simple: a boot.img, several binary blobs, some configs and a few scripts.

So now my question: Where do I start?


from xda-developers http://ift.tt/2azuk0y
via IFTTT

Aa new update is available (T810XXU2CPD9) - Any way to disable it?

Hey,
I just got a message that a new update is available. I am on 6.0.1 and don't want to update since I don't want to reroot and reinstall xposed all over again. It's now stuck in my notifications bar, can I somehow disable it and also deny the tablet to pull new updates in the future?

Thank you.


from xda-developers http://ift.tt/2al5817
via IFTTT

Sprint S4 4.4.2 Super Noob help

I'm ok to admit, I'm an ultra noob to android roms/rooting/ etc. and am asking for any help.

I've taken a few days and been plowing through videos and threads beyond what I can now feel comfortable and/or comprehend.

My end goal is to get native Hotspot on my phone, so my son can use his Tab 4 for wifi access.

Here are my stats of what I'm currently running on my phone :
Software version
L720VPUFNG2
Hardware version
L720.08
Model number
SPH-720
Android version
4.4.2
Baseband version
L720VPUFNG2
Kernerl Version
3.4.0-2162929
Build number
KOT49H.L720VPUFNG2
Non-Rooted

So far, I believe I need to root and then proceed with replacing the services.jar and services.odex files.
I am clueless which Root program I should use for starters (odin, cf auto, kingo, cryanogenmod, motochopper).
Then also if anyone per-2016 has had success with Hotspot wifi on their Sprint S4, same version as I have.

Thanks of course in advance for any assistance or guidance.


from xda-developers http://ift.tt/2azuRQj
via IFTTT

Request: Chuwi Hi12 dual boot remix 2.0 need root

Hope someone can help with root on this one
Might be something simmilair to the Teclast x98, but i don't know

i have the install images for it on dropbox, but since i'm pretty new inhere i can't post the link


from xda-developers http://ift.tt/2acEdyr
via IFTTT

Where is fingerprint data stored?

I've run into an issue where my phone is now accepting anything on the fingerprint scanner as a valid fingerprint, and I'm unable to add new prints, or clear existing ones for some reason. I'm going to try to just delete the fingerprint data before I do a factory reset, but I don't know where it is actually kept on the phone, if anyone has any idea, it'd be appreciated.

Update: I ran logcat *:E and got this when trying to remove fingerprints
07-30 20:30:21.342 960 960 E fpc_tac : fpc_tac_send_get_uint32_cmd failed with retval: -3
07-30 20:30:21.342 960 960 E fpc_fingerprint_hal: int fpc_remove(fingerprint_device*, uint32_t, uint32_t) failed -5, reloading db
07-30 20:30:21.358 960 960 E fpc_fingerprint_hal: int fpc_remove(fingerprint_device*, uint32_t, uint32_t): fpc_tac_load_user_db failed with error -4


from xda-developers http://ift.tt/2aoYjca
via IFTTT

Notification pull down quick settings buttons keep resetting to default

I have a Samsung Galaxy s5 SM-900t that I rooted using Odin/TWRP. This is a minor issue but my quick setting buttons keep resetting to default for some reason and I was wondering if anyone had any ideas. (wifi, location, sound, scrn rotation, bluetooth) is what it reverts back to no matter what I change them to.


from xda-developers http://ift.tt/2acEUry
via IFTTT

**backup ta - restore not working on windows 10 {solved}

UNFORTUNATELY I unlocked my z3's bootloader on windows 10, (as I have only this pc available), till I took a backup my TA partition, all the things were going well.. it took the backup as it usually does.
after that when I tried to restore my backup of TA partition, the BackupTA ended on an error.. :confused:
I tried many things but nothing worked.. the only way remained to change my whole OS from windows 10 to windows 7. (as i finally concluded that BackupTA is no more fully compatible with windows 10).
I tried some tricks and finally did it with some googling.

steps i took:
1. installed VM Box
2. Installed VM box extention pack (needed to connect usb 2.0 devices, i.e my z3 to that virtual machine)
3. Installed whole windows 7 using a dvd to that virtual machine. ( youtube it.. it is easy )
4. Copied the BackupTA whole folder (including backups) and Flashtool drivers to a pen drive.
5. Connect the pen drive to my pc and then connect it with virtual machine ( you have to select within virtual machine- devices>usb>*pen drive name* )

6. Installed flashtool drivers. (selected fastboot, flashmode & xperia z3 drivers only)
7. Connected my z3 to virtual machine. ( you have to select within virtual machine- devices>usb>xperia z3 or d6653 )
8. Run BackupTA.bat and followed the instructions to restore backup.
10. :highfive: And restore was complete.

hope will be helpful for all windows 10 users.. who do want to restore their TA backup at 4.00 AM :silly::cool:

links
[/SIZE]


from xda-developers http://ift.tt/2aoYLar
via IFTTT

Switching lg leon from 2g to 3g

Have tried switching my lg Leon from 2g to 3g but any time I switched to 3g da network is always appears no service until I switch it back


from xda-developers http://ift.tt/2acERfv
via IFTTT

Zenfone 5 Telegram Group is Back !

RULES : DON'T SPAM


JOIN GROUP WITH THIS LINK

http://ift.tt/2acELVe


from xda-developers http://ift.tt/2aoYYud
via IFTTT

Best Roms For HTC One M8 at the Moment?

Hey guys, I have had my htc one m8 (international) for around a good year and a half now, and I just rooted the phone last week and I am very happy with it! I really want to try custom roms but I don't know which one to start with. I heard about roms like cyanogenmod, viperone, skydragon, and maximushd. Which roms do you guys recommend me to try first? Or are there other roms that you guys are using right now that you can give me your review on? Thanks!


from xda-developers http://ift.tt/2aSNn51
via IFTTT

Blu R1 HD on TMobile. nice phone for the price, but not receiving text messages.

this is a strange one. I'm able to send out messages through phone, but will not receive them. I have tested sending and receiving from 3 different phones and none I do not receive any. I tried setting up an alternate APN, but did not help at all.
any thoughts?


from xda-developers http://ift.tt/2a8esE5
via IFTTT

[GUIDE] Ad removal - Debloat - Block OTA: easy TWRP install scripts

TWRP scripts: Ad removal - Debloat - Block OTA

Amazon Prime Variant and OEM Variant
Tested on Prime Variant 16GB, should work for other versions. Please report back if some packages are not removed

This guide only require you to be able to boot TWRP. You can follow this TWRP install guide and perform the installation of these .zip files AFTER step 8) (You must backup your system in case anything goes wrong, you will also need this backup to perform any future OTA, such as the one activating band 12). You can either stop there after installation, or proceed to the following steps if you want to have root access.
All .zip have to be installed using the TWRP "Install" function. You will need to download them on your phone or copy them on a SD card. You do not need to install all these packages at once. These scripts do not install anything, they only delete some files. You can extract them and open "update-binary" with your favorite text editor to see exactly what is done (always a good idea if you are concerned with your device security), and customize it if you wish.
This will only delete the apps in your system. If an update was performed, or if you used the app previously, the app and it's files may still be present on your device after running these scripts, but you can now uninstall them as any other app. This also means that you can rerun these scripts after a future OTA and this will not erase any app you reinstalled yourself.


Disable ads, block OTA and Amazon PARTIAL debloat "bluR1-Prime_AMZ-PARTIALdebloat-blockOTA.zip"

This package will remove all the ads from your Prime phone and block future OTA. You DO NOT need to reset / wipe your phone after installation.
It will also remove all Amazon apps from your system except for the Amazon Underground app store (recommended).
This option allows automatic background updates from the amazon app store and do not need you allow the installation of packages from unknown sources.


Disable ads, block OTA and Amazon FULL debloat "bluR1-Prime_AMZ-FULLdebloat-blockOTA.zip"

This package will remove all the ads from your Prime phone and block future OTA. You DO NOT need to reset / wipe your phone after installation.
It will also remove all Amazon apps from your system including the Amazon Underground app store.


Google PARTIAL debloat "bluR1-Prime_GOOGLE-debloat.zip"

This package will remove SOME stock Google apps that can be easily downloaded from the google play store and are not required for the system.
List of removed apps and their Google Play link for easy reinstall:

Google Search bar on home screen
http://ift.tt/1gbCZAG

Google Talkback
http://ift.tt/2aSOdPi

Google GMail
http://ift.tt/1s0Kp2I

Google Play Music
http://ift.tt/1k0TEd7

Youtube
http://ift.tt/1j5dLpD

Google Drive
http://ift.tt/1edajuU

Google Maps
http://ift.tt/1gP1vWF

Google Chrome
http://ift.tt/1i2ghzk

Google Talk Services
http://ift.tt/1gLS0vs

Google Play Videos
http://ift.tt/1ht0a89

Google Photos
http://ift.tt/1BsuDyL

Google Agenda
http://ift.tt/1qXDdBo

Google Hangouts
http://ift.tt/1mDceMi

Google Calculator
http://ift.tt/1OONn47

Google Clock
http://ift.tt/2a8eKuB

It will not disable Google Play store, Play services etc. Some of the apps can be removed by editing the script yourself. See the "update-binary" file. No additional help to do so will be provided, do it at your own risks.

Mediatek PARTIAL debloat "bluR1-Prime_MTK-debloat.zip"

This package will remove SOME stock Mediatek apps. These stock are have an ugly icon and can be replaced by better alternatives from the Play store or other.
Remove the ugly Gallery app. Replace it by any other gallery app, Google Photos is actually pretty good.
http://ift.tt/1BsuDyL

Remove the ugly File Manager app. Replace it by any other file explorer app is you like.
Amaze File Manager is a great and open source alternative http://ift.tt/1UAK8xc


Changelog:
07/30/2016 - Topic creation. Amazon ad removal / debloat / OTA blocking scripts from the original post moved here for a better visibility. Initial release of Google and Mediatek debloat scripts.



from xda-developers http://ift.tt/2aSNygL
via IFTTT

AWS Bands?

I know this phone doesn't actually support AWS, but I know some older samsung galaxy devices also did not support AWS.

Is there any way to get this to support AWS?


from xda-developers http://ift.tt/2a8eoUQ
via IFTTT

Is there a way to manually select 4K?

As it says in the title, or is there a way to make certain apps to run in 4k? For example running MXPlayer in 4K.



.


from xda-developers http://ift.tt/2aSOoKq
via IFTTT

s7 edge is having trouble with TMobile's LTE mobile data

So I recently purchased s7 edge g935fd from Taiwan. The phone was working fine there in Taiwan. When I came back to the States, however, the phone seems to have trouble connecting TMobile's LTE mobile data. The LTE goes on and off , no matter where I am. The phone still says that it is connected to LTE even when the data is not loading. I tried to reset the APN setting but no avail. I also tried that sim card on my old ASUS Zenphone 2 and the LTE worked fine so it is probably not the sim card's fault. The weird thing is that I can still call, text, and even use 3g network, it's only LTE that is not working properly. Anyone got a solution to this?


from xda-developers http://ift.tt/2a8eDz7
via IFTTT

Samsung Galaxy Grand Prime (SM-G530t) flashing help.

Hello everyone, its my first time using a rooted android. Im currently trying to install the xposed frame work I need to make the installer work. But im having trouble finding which one I need to use. Im new to the Root Club lol. As I just moved from an Iphone. (Which I did jail break.) It does use Lollipop 5.1.1. and it is arm. if someone could link me the correct framework that would be great!
Thanks
-Brett ;)


from xda-developers http://ift.tt/2aibPgf
via IFTTT

Help me please

Read from here please!!!!!!
http://ift.tt/2akYx6S

POST #165


Phone is encrypted!!!!


from xda-developers http://ift.tt/2azo3SG
via IFTTT

Can't import contacts to phone memory on Motorola X Pure

Hello,

Purchased a Moto X Pure recently and was able to get the bootloader unlocked and TWRP installed. I found a custom ROM
on here that is identical to what was on the phone minus bloat. I am trying to restore my contacts from my storage card
but it won't give me the option to import to phone memory, just an email account. I have been able to import
to phone memory from my other android phones which is why I like this over Apple. Not sure if this is enough info
so let me know if not. Just looking to not have to put contacts onto a gmail account, I prefer not to sync. Thanks.


from xda-developers http://ift.tt/2akYOGT
via IFTTT

SwiftKey Theme request

Can anyone make a SwiftKey theme looking exactly like Samsung Galaxy S 6's?
There are some already been made, but they are just bad copies.
Needs to be done by a proper designer.


from xda-developers http://ift.tt/2azo0WL
via IFTTT

Xposed problem

I have a problem trying to install xposed
asked me if i'am root and i granted it's access earlier
error mounting or some thing like that


from xda-developers http://ift.tt/2akYtUG
via IFTTT

Warning: Encryption is Not Working on Huawei P8 Lite (ALE-L21C432B574)

SECURITY WARNING!

In the second time I am forced to open a new thread because moderators continuously closing my threads without even reading it and ignoring the evidences I provided. The reason is why my previous two thread closed is that a few probably Huawei employees lobbied for the admins. They try to defend the company who provided you and me to P8 Lite a build which is potentially dangerous.

In the following video I said that all P8 and P8 Lite affected but the true is that I don't tested the P8. However I can garantee that all P8 Lite running on the latest build (ALE-L21C432B574) are have the same issue as I do!

Huawei is misleading you because your phone can NOT be encrypted!

See the video below:
14 minutes. Video evidence without cuts. Showing build number, Android security patch level, Kernel version and steps I performed to proof my statements.



Note: I refusing and resisting all kind of attacks against me because I fund the issue. Those who continuously posting they opinions, have no proof that I am wrong!

If you believe that I was wrong or the video above is fake, take a camera and record your phone, show your build number, Android security patch level, Kernel version while you performing the same steps as I did.

I GARANTEE THAT YOU CAN'T ENCRYPT THE PHONE BECAUSE WE HAVE THE EXACT SAME!

Stop harassing me. I am here to help others! If you don't need my help you can click on the X symbol on the right side upstairs on your browser.

Thank You,
AndroidSecurity


from xda-developers http://ift.tt/2azoex6
via IFTTT

stock, rooted, debloated rom?

Was wondering if anybody was working on a stock, deodex-deloated rooted rom? Not seeing much development happening.

Thanks.


from xda-developers http://ift.tt/2aSJfSk
via IFTTT

Quick Charge info app?

I know the nexus 6 is supposed to have the 9v quick charge feature, but I never seem to be able to tell if it's ever used it.
Currentwidget only give battery voltage and current, but doesn't mention anything about 5v or 9v charging.

Does anyone know of an app that will tell when the Qualcomm Quick Charge feature is in use?

Sent using Tapatalk


from xda-developers http://ift.tt/2a8a2wY
via IFTTT

Fire TV remote app and changing Wi-Fi

I'm on my way to the Outer Banks for a week at the beach. I have my fire stick but forgot my remote. I've checked stores to get a replacement remote or compatible bluetooth controller, but no luck. I have a possible solution, but not sure if it would work. Let me know what you think.

I setup the hotspot on my phone to mirror my home network. I already know I can fool my fire stick to think I'm online. Then I can use my wife's phone with the Fire TV remote app to pair with the Fire stick.

The problem comes with connecting with the Wi-Fi network when we'll be staying. It's password-protected. The remote app will only work as long as I'm connected to my phone's hotspot. Will the Fire stick stay connected long enough for me to enter the password, or will it disconnect the second I click the preferred network?

Does anyone else have any other suggestions? Is there any way to manually learn the network and password before connecting to it using adb? Anybody?


from xda-developers http://ift.tt/2aSJtZU
via IFTTT

s7 edge is having trouble with TMobile's LTE mobile data

So I recently purchased s7 edge g935fd from Taiwan. The phone was working fine there in Taiwan. When I came back to the States, however, the phone seems to have trouble connecting TMobile's LTE mobile data. The LTE goes on and off , no matter where I am. The phone still says that it is connected to LTE even when the data is not loading. I tried to reset the APN setting but no avail. I also tried that sim card on my old ASUS Zenphone 2 and the LTE worked fine so it is probably not the sim card's fault. The weird thing is that I can still call, text, and even use 3g network, it's only LTE that is not working properly. Anyone got a solution to this?


from xda-developers http://ift.tt/2a89Rlq
via IFTTT

Switch Custom ROM???

Hello,
I'm currently using my Amazon Fire 7" - 5th Gen with Nexus ROM, but I would like to switch the ROM and try out other ROMs.
Is there any guide that explains me how to backup my current ROM and switch to another one?
I could not find a guide that apply to my Fire 7".

Best regards
Nate


from xda-developers http://ift.tt/2aSJKvX
via IFTTT

One M9 Prime CE - gap between screen and frame

Hello :)

I have my HTC One M9 Prime CE for a week. I think it was a good choice, but I noticed one disturbing issue - small gap between screen and frame. This is picture of it:
http://ift.tt/2aFoux3 (sorry for non-clickable link but I haven't 10 posts)

I hope it's clear enough.

There's not any other gaps. This one is very thin, but backlight is clearly visible between the edge of glass and metal frame (not visible if screen is even slightly pressed there). It's possible that dust particles will get between glass and display or will affect backlight? It would be annoying for me. I think that the whole display is bonded and it's not real problem, but I'm not sure.

Of course, my phone is under warranty, however I want to avoid repairs because of a lot of bad opinions.

Thanks for feedback in advance.


from xda-developers http://ift.tt/2ai5D7U
via IFTTT

android 7.0 for htc m8

Will there be custum roms for android 7.0 or must buy another phone that support it ? :(


from xda-developers http://ift.tt/2ai5H7w
via IFTTT

[DISCUSSION] ABOOT Unlocking / Bootloader Unlocking

Hey Guys,

Suspected ROM is here: http://ift.tt/2ai5EbY

I'm not 100% sure of that actually is the ROM, I've herd of OTA updates going out, if someone could intercept them and post them that would be great (I don't physically have the device yet)

After quickly having a look at emmc_appsboot.mbn in IDA could you guys try a few things in fastboot?
1. fastboot oem unlock-go
2. fastboot frp-unlock OR fastboot oem frp-unlock

Cheers Guys!


from xda-developers http://ift.tt/2aForRT
via IFTTT

odin flash failure

Hello can you point me on the right dirrection please..I try to install trought odin an android version and it gave me the fail mesaage ..thanks a lot in advance


from xda-developers http://ift.tt/2ai5t0t
via IFTTT

help unbricking my amazon fire 7?

i have a amazon fire 7 running amazon os 5.1.2(rooted) and tried to install xposed framework on it. when it rebooted to, what i assume complete the framework download. it just stays on the fire logo screen. would love any help as i dont want to go tinkering any more on it in case of data loss. thanks


from xda-developers http://ift.tt/2aFnUzD
via IFTTT

S7Edge G9350 Qualcomm English HK Rom ROOTED TWRP 100% working

This is my first ever attempt at this so I cannot guarantee this will not damage your phone or destroy the housing market.

I bought this phone on a trip in China expecting to have a plentiful selection of roms on my return to Canada, only to be met with zero roms, and the only information on Chinese forums.

Having been inspired by the Aurora Rom, I decided to try and build something more compatible with North America

This is based off the latest Hong Kong (INT) firmware G9350ZHU2APG2

So far I have not learned how to properly build a standalone rom (flashable zip) so here is a 100% working guide for now. I will post the zip once I have figured that out

This was only tested on a Chinese G9350 Qualcomm S7Edge. Please don't attempt on any other model
  1. Backup your phone!
  2. Make sure your bootloader is unlocked!
  3. If you already have TWRP, and are having problems mounting data, boot into recovery and Format Data. If you want TWRP first, flash the TAR G9350.TWRP.3.0-321.tar
  4. Boot into download mode
  5. Launch the modified Odin, it will be in Chinese *thanks to TieXue
  6. Load all the corresponding files. (BL, CP, CSC, and the AP file G9350ZHU2APG2.mlkemac.tar) Only the AP is required, the rest is optional
  7. Click the bottom left button to start the flashing process.
  8. Reboot back into download mode
  9. Flash the AP TAR (G9350.TWRP.SuperSU.2.71.tar) This will boot into recovery and flash root
  10. You should now have a rooted, International speedy rom with working recovery
  11. There is no extra bloatware in this rom, however I recommend using TiBu or Package disabler to remove the TouchWiz bloat.

Thank you to all the devs on the Chinese forums http://ift.tt/2aFoqxy, and to Basketbuild for hosting my files.

Any comments or suggestions are welcome!


from xda-developers http://ift.tt/2ai5AsC
via IFTTT

[ROM][Unofficial crDroid]--20160730

Hello,

This is my first time uploading a ROM to xda so there may be some issues.

As the official crDroid thread hasn't been updated in a couple months, I've decided to post my build so that others may have an updated ROM. That being said, I plan to update this thread every week or two. As things break and I'm not very knowledgeable at fixing them, I can't commit to regular updates.

I'd like to thank firebird11 for helping me getting the thing to compile and the entire crDroid team for keeping their ROM up-to-date.

Download:
http://ift.tt/2aFnUPQ
md5sum: 6398dbf23d613b2e6a47600f56f5f97e


from xda-developers http://ift.tt/2ai5YHD
via IFTTT

Transferring (everything) to another moto g4 plus

Hello, I have a 32/2 GB Eu variant of the g4 plus. Much to my dismay it doesn't have the CDMA support for certain US networks. I'm giving mine to my mum here and getting a us 64/4 GB model, and would like to basically carbon copy this phone. I've rooted and optimised and modded and have tuned it with my governors and uninstalled all sorts of moto crap. My screen on time has gone from 4 h to ~5.5. Furthermore my Google play music is all cached. (Such a pain to redownload)
If possible I'd like to not have to set up everything again. I know titanium is good for apps, any recommendations for the rest?
Thanks guys!


from xda-developers http://ift.tt/2ai5nWF
via IFTTT

unlock or fail???

My device unlock??? Or unlock fail???

Attached Thumbnails
Click image for larger version Name: Screenshot_20160729-160840.png Views: N/A Size: 223.7 KB ID: 3828646  


from xda-developers http://ift.tt/2aFouxh
via IFTTT

Nokia X2 Pixel Density Changing Application

Quote:
Originally Posted by MHSabc

Good Morning,

I own Nokia X2 android. And it includes android 4.3 with a layer of Nokia X Software Platform 2.1.

There are many applications on google play store and also on XDA for changing the pixel density of mobile.

Is there any application of for Nokia X2 to change its pixel density with includes the rom of android 4.3 with a layer of Nokia X Software Platform 2.1. ?
Do we have root Nokia X2 ?

XDA has the follwoing post :
http://ift.tt/1a6dFPx

Please help me .

Thank You.


from xda-developers http://ift.tt/2aoPCi6
via IFTTT

Friday, July 29, 2016

Small Business Hacked, Also Criminal Stalking, Please Advise ZTE Android

Most articles are about hacking and my intent is to setup a full defense to my business that is thoroughly hacked through a pernicious hacking of all texts, phones and pc displays.

There is isatap adapter on pcs, system preferences moved and lost on macs, remote shutdown, extension of battery life and monitoring.

This has to do with a circumstances I won't go into but there is a criminal suspected of jealous stalking and tampering.

There is a ZTE maven phone with clients calling from as long as 7-1/2 years and they expect to text, and call without being surveilled or even the phone just being shut down or even worse a physical stalking as soon as I turn it on or have it around.

What are the options to 1) get rooted startup scripts and packages off my phone and 2) trap data about the individuals suspected please.

My first priority is to get phone function back. I have master reset as much as 10 x a day and even on different sim and phone there is still a changing or spoofing of apps within 10 minutes. One app had a whopping 238 permissions added to it including finding out what car speed you are at and so forth. Please help!

I am technical just not too techie with android yet. I do need my business back there is almost total financial ruin and damages, financial and beyond please.

Thank you.


from xda-developers http://ift.tt/2alsjTZ
via IFTTT

Cyanogenmod 13

honor 4x have some specs to our device
anyone here can port cm13 from honor 4 x to our beloved device
sorry for my bad english


from xda-developers http://ift.tt/2aQK4uW
via IFTTT

NR: Android 6.X ROM for T-mobile G3

Hi,

I need some recommendation on a custom rom for my Lg G3 D851:

Preference:
1. Android 6.0+
2. Stable, power saving
3. minimum pre-installed apps
4. can use Android Pay (CM13 is not certificated)

Thanks


from xda-developers http://ift.tt/2a6b24z
via IFTTT

problem in flashing TWRP recovery in galaxy j2

hi
i want to root my galaxy j2
so at first i need to flash TWRP through odin
so i installed Odin3 v3.09
and
twrp-3.0.2-0-j2lte.img
at first it get stuck at "get pit for mappiong"
but after several usb port changing it passed this point and start flashing then i get the "reset" then my phone restart
and what it supposed to do is to boot right to recovory, but it didn't it
it booted normally to android
and when i hold the vol down + power while the phone is off o boot to safe mode


from xda-developers http://ift.tt/2aQKzFA
via IFTTT

Layers Manager Works

Amazon Prime model, rooted, unlocked, stock rom minues ads and OTA. 16gb btw.

Can confirm Layers Manager works with the inversion theme. Only app that won't take a layer is youtube so far. But playstore and gmail and everything else I have can be themed and is awesome!

http://ift.tt/1RdKObw

http://ift.tt/1Tz9ZXf

Attached Thumbnails
Click image for larger version Name: Screenshot_20160729-162344.png Views: N/A Size: 81.4 KB ID: 3827772   Click image for larger version Name: Screenshot_20160729-162334.png Views: N/A Size: 49.3 KB ID: 3827773   Click image for larger version Name: IMG_20160729_162314.jpg Views: N/A Size: 49.3 KB ID: 3827774   Click image for larger version Name: Screenshot_20160729-162223.jpg Views: N/A Size: 90.7 KB ID: 3827775   Click image for larger version Name: Screenshot_20160729-162452.png Views: N/A Size: 39.4 KB ID: 3827776  


from xda-developers http://ift.tt/2aETf2p
via IFTTT