Slipsystems Automate My Life

AUTOMATE MY LIFE

A LIST OF AUTOMATION SCRIPTS AND PROGRAMS THAT WILL AUTOMATE YOUR EVERYDAY LIFE.
MOST BUT NOT ALL OF THESE TUTORIALS REQUIRE TASKER AND A PLUGIN OF SOME SORT.
WINDOWS TUTORIALS CAN BE FOUND IN THE FIRST POST.
LINUX TUTORIALS CAN BE FOUND IN THE SECOND POST.
GENERAL TUTORIALS CAN BE FOUND IN BOTH POSTS.
THERE WILL BE SOME TASKS THAT ARE ONLY LISTED ON WINDOWS AND SOME TASKS THAT ARE ONLY ONLY LISTED ON LINUX, THIS DOES NOT MEAN IT IS NOT POSSIBLE TO PERFORM THEM ON OTHER PLATFORMS IT JUST MEANS I AM UNSURE OF HOW TO GET THEM TO WORK.

WINDOWS

Automatically Turn On Your Computer on a Schedule

Over View
This task is reasonable easy to set up, It will allow you to turn on your home or work pc on a schedule. In this case we are turning on our computer as soon as we unplug our device from the charger.

Requirements

• Tasker
• Wol Wake on Lan Wan

Setup

Before we get into creating our task we first need to set up the Wol Wake on Lan Wan application

Enable Wake on Lan

1. On the computer go to Control Panel>Network and Internet>Network and Sharing Center
2. Click on Change Adapter settings
3. Right Click on Ethernet and go to properties
4. Click Configure and then click the Advanced tab
5. Find Wake on Magic Packet and Change the Value to Enabled

Find Your Mac Address

1. Open Command Prompt
2. type "ipconfig /all"
3. under Ethernet adapter find physical address(00-11-22-33-44-55)
4. Remember It or write it down

Setup Wol Wake on Lan Wan

1. Open Wol Wake on Lan Wan
2. Press Add New
3. Under Name Call It Anything
4. Under Mac Enter your mac address as in ipconfig
5. Under SecureOn Leave As Is
6. Under IP or Domain Enter your Default Gateway also found in ipconfig
7. Under Port Leave as is
8. Check Send as Broadcast
9. The Rest is fine as default
10. Press Save

Create The Task

1. Open Tasker
2. Press the TASKS Tab
3. Press The +
4. Give The Task A Name Like Switch on Home PC
5. Press The +
6. Press Plugin
7. Press WoL Wake On Lan
8. Press the configuration pencil
9. Select the name you chose when setting up Wol Wake on Lan
10. Press the back button twice to save changes to configuration and task

Create The Profile

1. Press the profiles tab
2. Press the + Button to add a new profile
3. Select State
4. Select Power
5. Select Power
6. Select Source Any
7. press back to save
8. select the task we created
9. long press on the task and press move to exit

from xda-developers http://ift.tt/20H8g5m
via IFTTT